Description
Vehicle speed signal is transmitted from ABS actuator and electric unit (control unit) via CAN communication line to combination meter.
DTC Logic
DTC DETECTION LOGIC
DTC |
CONSULT |
Detection Condition |
Possible Cause |
B2205 | VEHICLE SPEED CIRC [B2205] | Malfunction is detected when an erroneous speed signal is received for 2 seconds or more. |
|
Diagnosis Procedure
1.CHECK COMBINATION METER INPUT SIGNAL
Is the inspection result normal? YES >> Perform “Self Diagnostic Result” of “ABS” Refer to BRC-44, "CONSULT Function".
NO >> Replace combination meter. Refer to MWI-82, "Removal and Installation".
DTC/circuit diagnosis
C1B92-00 BRAKE CONTROL SYSTEM
DTC Description
DTC DETECTION LOGIC
DTC
Display Item
(Trouble diagnosis content)
Malfunction detected condition
C1B92-00
BRAKE CONTROL SYSTEM
(Brake control system)
When a malfunction is detected in ABS actuator and elect ...
Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT
PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used along
with a front seat belt, helps to reduce the risk or severity of injury to the
...
C1115 ABS sensor [abnormal signal]
DTC Logic
DTC DETECTION LOGIC
DTC
Display Item
Malfunction detected condition
Possible causes
C1115
ABS SENSOR
[ABNORMAL SIGNAL]
When difference in wheel speed between any wheel
and others is detected while the vehicle is driven because
of installation of ti ...