Nissan Rogue Service Manual: C1704, C1705, C1706, C1707 low tire pressure
DTC Logic
NOTE: The Signal Tech II Tool [- (J-50190)] can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information.
- Activate and display TPMS sensor IDs
- Display tire pressure reported by the TPMS sensor
- Read TPMS DTCs
- Register TPMS sensor IDs
DTC DETECTION LOGIC
|
DTC |
Display Item |
Malfunction Detected Condition |
Possible Cause |
| C1704 | LOW PRESSURE FL | Front LH tire pressure drops to 187.5 kPa (26.5 psi) or less. |
|
| C1705 | LOW PRESSURE FR | Front RH tire pressure drops to 187.5 kPa (26.5 psi) or less. | |
| C1706 | LOW PRESSURE RR | Rear RH tire pressure drops to 187.5 kPa (26.5 psi) or less. | |
| C1707 | LOW PRESSURE RL | Rear LH tire pressure drops to 187.5 kPa (26.5 psi) or less. |
DTC CONFIRMATION PROCEDURE
1.PERFORM SELF DIAGNOSTIC RESULT
With CONSULT
- Check tire pressure for all wheels and adjust to the specified value. Refer to WT-65, "Tire Air Pressure".
- Drive at a speed of 40 km/h (25 MPH) or more for 3 minutes, and then drive the vehicle at any speed for 10 minutes.
- Perform Self Diagnostic Result.
Is DTC C1704, C1705, C1706, or C1707 detected? YES >> Proceed to WT-24, "Diagnosis Procedure".
NO >> Inspection End.
Diagnosis Procedure
NOTE: The Signal Tech II Tool [- (J-50190)] can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information.
- Activate and display TPMS sensor IDs
- Display tire pressure reported by the TPMS sensor
- Read TPMS DTCs
- Register TPMS sensor IDs
1.TIRE PRESSURE SENSOR ID REGISTRATION
Perform tire pressure sensor ID registration. Refer to WT-21, "Work Procedure".
Can the tire pressure sensor ID registration be completed? YES >> GO TO 2.
NO >> Replace applicable tire pressure sensor. Refer to WT-61, "Removal and Installation".
2.CHECK TIRE PRESSURE
Check the air pressure of all wheels. Refer to WT-65, "Tire Air Pressure".
Is the inspection result normal?
YES >> Perform DTC CONFIRMATION PROCEDURE again. Refer to WT-24, "DTC Logic".
NO >> GO TO 3.
3.CHECK TIRE PRESSURE SIGNAL
With CONSULT
- Adjust tire pressure for all wheels to the specified value. Refer to WT-65, "Tire Air Pressure".
- Select “AIR PRESSURE MONITOR” of “BCM” Data Monitor.
- Check that the air pressures match the specified value.
|
Monitor item |
Displayed value |
| AIR PRESS FL | Approximately equal to value indicated on tire gauge for front LH tire |
| AIR PRESS FR | Approximately equal to value indicated on tire gauge for front RH tire |
| AIR PRESS RR | Approximately equal to value indicated on tire gauge for rear RH tire |
| AIR PRESS RL | Approximately equal to value indicated on tire gauge for rear LH tire |
Is the inspection result normal? YES >> Inspection End.
NO >> Repair or replace malfunctioning components.
C1708, C1709, C1710, C1711 transmitter (no data)
DTC Logic
NOTE:
The Signal Tech II Tool [- (J-50190)] can be used to perform the following
functions. Refer to the Signal Tech II
User Guide for additional information.
Activate and dis ...
Other materials:
P2122, P2123 APP sensor
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detecting condition
P2122
APP SEN 1/CIRC
(Throttle/pedal position sensor/switch ″D″
circuit low)
An excessively low voltage from the APP sensor 1 is sen ...
How to use the [ ] button
For additional information, refer to the separate
Navigation System Owner’s Manual regarding
the “SiriusXM® Travel Link”, and “Traffic” features.
For additional information, refer to “Nissan-
ConnectSM with Mobile Apps” in this section
regarding “My Apps” key.
For ad ...
Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT
PRE-TENSIONER"
with a front seat belt, helps to reduce the risk or severity of injury to the
driver and front passenger for certain
types of collision. Information necessary to service the system s ...