Nissan Rogue Owners Manual: CD care and cleaning

Nissan Rogue Owners Manual / Monitor, climate, audio, phone and voice recognition systems / Audio system / CD care and cleaning

CD care and cleaning

Handle a CD by its edges. Do not bend the disc. Never touch the surface of the disc.
Always place the discs in the storage case when they are not being used.
To clean a disc, wipe the surface from the center to the outer edge using a clean, soft cloth. Do not wipe the disc using a circular motion.
Do not use a conventional record cleaner or alcohol intended for industrial use.
A new disc may be rough on the inner and outer edges. Remove the rough edges by rubbing the inner and outer edges with the side of a pen or pencil as illustrated.

CD care and cleaning

Source select and power on switch
Menu control switch/ENTER button
(Back) switch
Volume control switc

Bluetooth® streaming audio with Navigation System

If you have a compatible Bluetooth® audio device that is capable of playing audio files, the device can be connected to the vehicle’s audio system so that the audio files on the device play thr ...

Steering wheel switch for audio control

SOURCE select switch With the ignition switch in the ACC or ON position, push the SOURCE switch to turn the audio system on. Push the source select switch to change the mode in the following se ...

Other materials:

Precaution
Precaution for supplemental restraint system (srs) "air bag" and "seat belt pre-tensioner" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the ...

Tow truck towing
CAUTION: All applicable state or Provincial (in Canada) laws and local laws regarding the towing operation must be obeyed. It is necessary to use proper towing equipment to avoid possible damage to the vehicle during towing operation. Towing is in accordance with Towing P ...

DTC/circuit diagnosis
U1000 CAN COMM CIRCUIT Description Refer to LAN-8, "System Description". DTC Logic DTC DETECTION LOGIC CONSULT Display DTC Detection Condition Possible Cause CAN COMM CIRCUIT [U1000] When IPDM E/R cannot communicate with CAN communication sig ...