Nissan Rogue manuals

Nissan Rogue Service Manual: Low tire pressure warning lamp

Component Function Check

1.CHECK THE ILLUMINATION OF THE LOW TIRE PRESSURE WARNING LAMP

Check that the low tire pressure warning lamp is turned OFF after illuminating for approximately 1 second, when the ignition switch is turned ON.

Is the inspection result normal? YES >> Inspection End.

NO >> Perform trouble diagnosis. Refer to WT-43, "Diagnosis Procedure".

Diagnosis Procedure

1.PERFORM SELF DIAGNOSTIC RESULT

With CONSULT

  1.  Turn the ignition switch ON.
  2.  Perform “SELF DIAGNOSTIC RESULT”.

Are any DTCs detected? YES >> Refer to BCS-48, "DTC Index" (with Intelligent Key System) or BCS-108, "DTC Index" (without Intelligent Key System).

NO >> GO TO 2.

2.CHECK LOW TIRE PRESSURE WARNING LAMP SIGNAL

With CONSULT

  1.  Turn the ignition switch ON.
  2.  On “DATA MONITOR” select “WARNING LAMP.”
  3. Check that the low tire pressure warning lamp is turned OFF after illuminating for approximately 1 second, when the ignition switch is turned ON.

Is the inspection result normal? YES >> Check the combination meter. Refer to MWI-21, "CONSULT Function (METER/M&A)".

NO >> Replace the BCM. Refer to BCS-75, "Removal and Installation" (with Intelligent Key System) or BCS-135, "Removal and Installation" (without Intelligent Key System).

U1010 control unit (CAN)
DTC Logic DTC DETECTION LOGIC DTC Display Item Malfunction Detected Condition Possible cause U1010 CONTROL UNIT (CAN) BCM detected internal CAN communication circuit m ...

Power supply and ground circuit
WITH INTELLIGENT KEY SYSTEM WITH INTELLIGENT KEY SYSTEM : Diagnosis Procedure Regarding Wiring Diagram information, refer to BCS-50, "Wiring Diagram". 1. CHECK FUSE Check that the follow ...

Other materials:

Vehicle Information Display
The vehicle information display is located to the left of the speedometer. It displays such items as:  Vehicle settings  Trip computer information  Drive system warnings and settings (if so equipped)  Cruise control system information  NISSAN Intelligent K ...

P1572 brake pedal position switch
DTC Description DTC DETECTION LOGIC NOTE: This self-diagnosis has the one trip detection logic. When malfunction A is detected, DTC is not stored in ECM memory. And in that case, 1st trip DTC and 1st trip freeze frame data are displayed. 1st trip DTC is erased when ignition switch OFF. And ...

Service data and specifications (SDS)
Steering Wheel Steering Angle Steering Column STEERING COLUMN LENGTH STEERING COLUMN ROTATING TORQUE TILT MECHANISM OPERATING RANGE Steering Gear STEERING OUTER SOCKET AND INNER SOCKET INNER AND OUTER SOCKET LENGTH RACK STROKE RACK SLIDING FORCE ...

© 2014-2019 Copyright www.nirogue.com