Nissan Rogue manuals

Nissan Rogue Owners Manual: Navigation System voice commands

The following voice commands are available for the Navigation System:

For additional information about these commands, refer to the separate Navigation System Owner’s Manual.

Audio system voice commands

To access the audio system voice commands:

  1.  Press the button.
  2.  Say “Audio”
  3.  Speak a command from the following available commands:

For additional information about the audio system, refer to “Audio system” in this section.

Information voice commands

The following voice commands are available for the information functions of the Navigation System:

For additional information about these commands, refer to the separate Navigation System Owner’s Manual.

My Apps Voice Commands

Many Apps can be accessed using this voice command. For additional information, refer to “NissanConnectSM with Mobile Apps” in this section.

Help voice commands

The following voice commands can be spoken to have the system provide instructions and tips for using the NISSAN Voice Recognition system.

Troubleshooting guide

The system should respond correctly to all voice commands without difficulty. If problems are encountered, follow the solutions given in this guide for the appropriate error. Where the solutions are listed by number, try each solution in turn, starting with number one, until the problem is resolved.

Symptom/error message Solution
The system responds “Command Not Recognized” or the system fails to recognize the command correctly.
  1. Ensure that the command format is valid. Use the “List Commands” or “What Can I Say?” command under the “Help” menu.
  2.  Speak clearly without pausing between words and at a level appropriate to the ambient noise level.
  3.  Ensure that the ambient noise level is not excessive (for example, with the windows open or the defroster on).

NOTE: If it is too noisy to use the phone, it is likely that voice commands will not be recognized.

  1.  If optional words of the command have been omitted, then the command should be tried with these in place.
Bluetooth® Hands-Free Phone System voice commands
To access the Bluetooth® Hands-Free Phone System voice commands:  Press the button.  Say “Call” and then a name in the vehicle phonebook to call that entry. Otherwise, say ...

Starting and driving
...

Other materials:

Removal and installation
FRONT COMBINATION LAMP Exploded View Front fender Front combination lamp Clip Removal and Installation REMOVAL  Remove front bumper fascia. Refer to EXT-17, "Removal and Installation".  Remove front combination lamp bolts and clip.  Pull front c ...

P0112, P0113 IAT sensor
DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition P0112 IAT SEN/CIRCUIT- B1 (Intake air temperature sensor 1 circuit low bank 1) An excessively low voltage from the intake air temperature sensor ...

Changing wheels and tires
Tire rotation NISSAN recommends rotating the tires every 7,500 miles (12,000 km). Refer to “Flat tire” in the “In case of emergency” section in this manual for tire replacing procedures. As soon as possible, tighten the wheel nuts to the specified torque with a torque wrench. ...

© 2014-2019 Copyright www.nirogue.com