Nissan Rogue manuals

Nissan Rogue Service Manual: Preparation

Special Service Tools

The actual shapes of TechMate tools may differ from those of special service tools illustrated here.

Tool number (TechMate No.) Tool name Description
1. KV311039S0 ( — ) Charging pipe set
2. KV31103920* ( — ) O-ring

CVT fluid changing and adjustment
KV38107900 ( — ) Protector a: 32 mm (1.26 in) dia.

Installing drive shaft

*: The O-ring as a unit part is set as a SST.

Commercial Service Tools

Tool number
Tool name
Description
Power tool

Loosening nuts and bolts
Lint-free paper

Cleaning transaxle
Drift
a: 56 mm (2.20 in) dia.
b: 50 mm (1.97 in) dia.

Installing differential side oil seal
Drift
a: 65 mm (2.56 in) dia.
b: 60 mm (2.36 in) dia.

Installing converter housing oil seal
Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONE ...

System description
...

Other materials:

Unit disassembly and assembly
ELECTRIC CONTROLLED COUPLING Exploded View Stud bolt Connector bracket Reamer bolt Electric controlled coupling assembly Wave spring Drive pinion oil seal Drive pinion lock nut Pinion front bearing Gear carrier Collapsible spacer Drive pinion adjusting shim Pini ...

Unbalance steering wheel turning force (torque variation)
Description Unbalance steering wheel turning force (torque variation). Diagnosis Procedure 1.PERFORM SELF-DIAGNOSIS With CONSULT  Turn the ignition switch OFF to ON.  Perform “EPS” self-diagnosis. Is any DTC detected? YES >> Check the DTC. Refer to STC-13, "DTC ...

P117A air fuel ratio
DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition P117A AIR FUEL RATIO B1 (AIR FUEL RATIO B1) ECM detects a lean/rich air fuel ratio state in any cylinder for a specified length of time. ...

© 2014-2019 Copyright www.nirogue.com