Nissan Rogue Service Manual: Preparation
Special service tool
The actual shapes of techmate tools may differ from those of special service tools illustrated here.
| Tool number (techmate no.) Tool name | Description | |
| St33061000
(j-8107-2)
drift a: 38 mm (1.50 In) dia. B: 28.5 Mm (1.122 In) dia. |
 |
Removing gear ring bearing inner race (transfer case side) |
| Kv381054s0 (j-34286) puller |  |
Removing ring gear shaft oil seal |
| St3127s000 (j-25765-a) preload gauge |  |
Measuring preload torque |
Commercial Service Tool
| Tool name | Description | |
| Power tool |  |
Loosening nuts, screws and bolts |
| Drift a: 52 mm (2.05 in) dia. b: 44 mm (1.73 in) dia. |
 |
Removing gear ring bearing inner race (transfer cover side) |
| Drift a: 56.5 mm (2.224 in) dia. b: 48 mm (1.89 in) dia. |
 |
Installing side oil seal (installing transfer case oil seal) |
| Drift a: 44 mm (1.73 in) dia. b: 33 mm (1.3 in) dia. |
 |
Installing ring gear shaft oil seal |
| Puller |  |
Removing ring gear bearing (left) inner race (transfer case side) |
| Drift a: 70 mm (2.76 in) dia. b: 60 mm (2.36 in) dia. |
 |
Installing oil seal (installing pinion bearing seal) |
| Drift a: 78 mm (3.07 in) dia. b: 68 mm (2.68 in) dia. |
 |
Installing side oil seal (installing transfer cover oil seal) |
| Replacer |  |
|
| Drift a: 58 mm (2.28 in) dia. b: 55 mm (2.17 in) dia. |
 |
Installing ring gear bearing (left) inner race (transfer case side) |
| Drift a: 62 mm (2.44 in) dia . b: 58 mm (2.28 in) dia. |
 |
Installing ring gear bearing (right) inner race (transfer cover side) |
| Drift a: 73.5 mm (2.894 in) dia. |
 |
Installing ring gear bearing (left) outer race (transfer case side) |
| Drift a: 87 mm (3.43 in) dia. |
 |
Installing ring gear bearing (right) outer race (transfer cover side) |
| Drift a: 20 mm (0.79 in) dia. |
 |
Removing drive pinion |
| Drift a: 50 mm (1.97 in) dia. b: 41 mm (1.61 in) dia. |
 |
Installing pinion bearing assembly |
| Drift a: 40 mm (1.57 in) dia. b: 25 mm (0.98 in) dia. |
 |
Installing companion flange |
Precaution
Precaution for supplemental restraint system (srs) "air bag" and "seat
belt
pre-tensioner"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONE ...
System description
COMPONENT PARTS
Component Parts Location
Instrument lower panel LH
Rear final drive assembly
Rear wheel house outer panel in luggage
room of left side
No.
Component
Fu ...
Other materials:
Operating range
Operating range
The Intelligent Key functions can only be used
when the Intelligent Key is within the specified
operating range from the request switch 1 .
When the Intelligent Key battery is discharged or
strong radio waves are present near the operating
location, the Intelligent Key op ...
ID registration procedure
Description
This procedure must be performed after replacement of a tire pressure sensor
or BCM.
Work Procedure
TPMS ID registration can be performed using one of the following procedures:
Transmitter Activation tool [KV48105501 (J-45295-A)] with CONSULT
(preferred method)
...
Preparation
Special Service Tool
The actual shape of the tools may differ from those illustrated here.
Tool number
(TechMate No.)
Tool name
Description
—
(J-39570)
Chassis Ear
Locating the noise
—
(J-50397)
NISSAN Squeak and Rattle
Kit
...