Nissan Rogue Service Manual: Removal and installation

Basic inspection

COMPONENT INSPECTION Inspection AFTER A COLLISION WARNING: Inspect all seat belt assemblies including retractors and attaching hardware after any collision. NISSAN/INFINITI recommends that al ...

Front seat belt

Exploded View Seat belt height adjuster (RH) Seat belt height adjuster bolt cover (RH) Seat belt retractor (RH) Seat belt buckle (RH) Seat belt buckle (LH) Seat belt retractor ( ...

Other materials:

Hood
Hood Pull the hood lock release handle 1 located below the instrument panel until the hood springs up slightly.  Locate the lever 2 in between the hood and grille and push the lever sideways with your fingertips.  Raise the hood 3 .  Remove the support rod 4 and in ...

CAN system (type 1)
DTC/CIRCUIT DIAGNOSIS MAIN LINE BETWEEN IPDM-E AND DLC CIRCUIT Diagnosis Procedure 1.CHECK CONNECTOR  Turn the ignition switch OFF.  Disconnect the battery cable from the negative terminal.  Check the following terminals and connectors for damage, bend and loose connecti ...

P1212 TCS communication line
Description This CAN communication line is used to control the smooth engine operation during the TCS operation. Pulse signals are exchanged between ECM and “ABS actuator and electric unit (control unit)”. Be sure to erase the malfunction information such as DTC not only for “ABS ac ...