Nissan Rogue Owners Manual: Run-flat tires (if so equipped)
Run-flat tires are those tires that can be used
temporarily if they are punctured. For additional
information, refer to “Run-flat tires” in “Maintenance
and do-it-yourself.”
For additional information, refer to the tire safety
information in the Warranty Information Booklet.
WARNING
- Although you can continue driving with
a punctured run-flat tire, remember that
vehicle handling stability is reduced,
which could lead to an accident and
personal injury. Also, driving a long distance
at high speeds may damage the
tires.
- Do not drive at speeds above 50 MPH
(80 km/h) and do not drive more than
approximately 93 miles (150 km) with a
punctured run-flat tire. The actual distance
the vehicle can be driven on a flat
tire depends on outside temperature,
vehicle load, road conditions and other
factors.
- Drive safely at reduced speeds. Avoid
hard cornering or braking, which may
cause you to lose control of the vehicle.
- If you detect any unusual sounds or
vibrations while driving with a punctured
run-flat tire, pull off the road to a
safe location and stop the vehicle as
soon as possible. The tire may be seriously
damaged and need to be
replaced.
|
CAUTION
- Never install tire chains on a punctured
run-flat tire, as this could damage your
vehicle.
- Avoid diving over any projection or pothole,
as the clearance between the vehicle
and the ground is smaller than
normal.
- Do not enter an automated car wash
with a punctured run-flat tire.
- Have the punctured tire inspected by a
NISSAN dealer or other authorized repair
shop. Replace the tire as soon as
possible if the tire is seriously
damaged.
|
This vehicle is equipped with TPMS. It monitors
tire pressure of all tires except the spare. When
the low tire pressure warning light is lit, and the
Tire Pressure Low - Add Air warning appears in
...
If you have a flat tire, follow the instructions below:
Stopping the vehicle
Safely move the vehicle off the road and
away from traffic.
Turn on the hazard warning flashers.
&nb ...
Other materials:
Service data and specifications (SDS)
General Specification
GENERAL SPECIFICATIONS
( ): Valve timing control “ON”
Drive belt
Spark Plug
Intake Manifold
Exhaust Manifold
Camshaft
*1: Cam wear limit
*2: Total indicator reading
VALVE LIFTER
VALVE CLEARANCE
*: Approximately 80°C (176°F)
AVAIL ...
Voice commands
You can use voice commands to operate various
Bluetooth® Hands-Free Phone System features
using the NISSAN Voice Recognition system. For
additional information, refer to “NISSAN Voice
Recognition System” in this section.
Voice Prompt Interrupt
While using the Voice Recognition system, the ...
P0605 ECM
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detecting condition
P0605
ECM
[Internal control module read only memory
(ROM) error]
Malfunction in the internal ROM of ECM.
POSSIBLE CAUSE
ECM
FAIL-SAFE
T ...
© 2014-2019 Copyright www.nirogue.com