Symptom Table
LOW TIRE PRESSURE WARNING LAMP SYMPTOM CHART
Diagnosis items | Symptom (Power switch ON) | Low tire pressure warning lamp | Cause | Action |
Low tire pressure warning lamp | The low tire pressure warning lamp illuminates for 1 second, then turns OFF. | ![]() |
Wake-up operation for all tire pressure sensors at wheels is completed. | No system malfunctions |
The low tire pressure warning lamp repeats blinking ON for 2 seconds and OFF for 0.2 seconds. | ![]() |
Wake-up operation for all tire pressure sensors at wheels is not completed. | Perform the ID registration for all tire pressure sensors at wheels. Refer to WT-21, "Work Procedure". | |
The low tire pressure warning lamp blinks once. | ![]() |
The front left tire pressure sensor is not activated. | Perform the ID registration for the tire pressure sensor at front left wheel. Refer to WT-21, "Work Procedure". | |
The low tire pressure warning lamp repeats blinking twice. | ![]() |
The front right tire pressure sensor is not activated. | Perform the ID registration for the tire pressure sensor at front right wheel. Refer to WT-21, "Work Procedure". | |
The low tire pressure warning lamp repeats blinking for 3 times. | ![]() |
The rear right tire pressure sensor is not activated | Perform the ID registration for the tire pressure sensor at rear right wheel. Refer to WT-21, "Work Procedure". | |
The low tire pressure warning lamp repeats blinking for 4 times. | ![]() |
The rear left tire pressure sensor is not activated. | Perform the ID registration for the tire pressure sensor at rear left wheel. Refer to WT-21, "Work Procedure". | |
The low tire pressure warning lamp turns ON and stays illuminated. | ![]() |
Low tire pressure | Check the tire pressure for all wheels and adjust to the specified value. Refer to WT-65, "Tire Air Pressure". | |
The low tire pressure warning lamp repeats blinking at 0.5-second intervals for 1 minute, and then stays illuminated. | ![]() |
The combination meter fuse is open or removed (or pulled out). | Check and install the combination meter fuse. If necessary, replace the fuse. | |
The BCM harness connector is removed. | Check the connection conditions of the BCM harness connector, and repair if necessary. | |||
Tire Pressure Monitoring System (TPMS) malfunction. |
|
NOTE: If tire pressure sensor wake-up operation is not completed for two or more tire pressure sensors, the applicable low tire pressure warning lamp blinking patterns are displayed continuously.
(Example: Blinks once/OFF/blinks 3 times = Wake-up operation is not completed at the front left wheel and rear right wheel tire pressure sensors.)
DTC/circuit diagnosis
C1B92-00 BRAKE CONTROL SYSTEM
DTC Description
DTC DETECTION LOGIC
DTC
Display Item
(Trouble diagnosis content)
Malfunction detected condition
C1B92-00
BRAKE CONTROL SYSTEM
(Brake control system)
When a malfunction is detected in ABS actuator and elect ...
Wiring diagram
HEADLAMP
Wiring Diagram
DAYTIME LIGHT SYSTEM
Wiring Diagram
AUTO LIGHT SYSTEM
Wiring Diagram
FRONT FOG LAMP SYSTEM
Wiring Diagram
TURN SIGNAL AND HAZARD WARNING LAMP SYSTEM
Wiring Diagr ...
FM/AM/SAT radio with compact disc (CD) player (Type A) (if so equipped)
FM/AM/SAT radio with compact disc (CD) player (Type A)
CD eject button
XM button*
Display screen
CD insert slot
SEEK button
SCAN button
CAT button
BACK button
APPS button
ENTER/SETTING button/ TUNE/SCROLL
knob
&n ...