Nissan Rogue Service Manual: B2268 water temp

Nissan Rogue Service Manual / Driver information & multimedia / Meter, Warning Lamp & Indicator / DTC/circuit diagnosis / B2268 water temp

Description

The engine coolant temperature signal is transmitted from ECM to the combination meter via CAN communication.

DTC Logic

DTC DETECTION LOGIC

DTC	CONSULT	Detection Condition	Possible Cause
B2268	WATER TEMP [B2268]	ECM continuously transmits abnormal engine coolant temperature signals for 60 seconds or more.	Engine coolant temperature sensor ECM

Diagnosis Procedure

1.PERFORM SELF DIAGNOSIS OF ECM

Perform "Self Diagnostic Result" of "ECM", and repair or replace malfunctioning parts.

>> Refer to EC-93, "DTC Index".

B2267 engine speed

Description The engine speed signal is transmitted from ECM to the combination meter with CAN communication. DTC Logic DTC DETECTION LOGIC DTC CONSULT Detection Conditio ...

Power supply and ground circuit

COMBINATION METER COMBINATION METER : Diagnosis Procedure Regarding Wiring Diagram information, refer to MWI-32, "Wiring Diagram". 1.CHECK FUSES Check that the following fuses are not bl ...

Other materials:

Door outside molding
Exploded View Front door panel Front door outside molding Rear door panel Rear door outside molding Pawl Removal and Installation FRONT DOOR OUTSIDE MOLDING Removal Lower front door glass. Remove door mirror. Refer to MIR-22, "Removal and Installa ...

Rocker cover
Oil filler cap Rocker cover Rocker cover gasket Refer to INSTALLATION Engine front Removal and Installation REMOVAL Remove intake manifold. Refer to EM-26, "Removal and Installation". Remove wheel and tire (RH) using a power to ...

P014C, P014D, P015A, P015B, A/F sensor 1
DTC Description DTC DETECTION LOGIC To judge malfunctions, this diagnosis measures response time of the A/F signal computed by ECM from the A/ F sensor 1 signal. The time is compensated by engine operating (speed and load), fuel feedback control constant, and the A/F sensor 1 temperature ind ...