Nissan Rogue manuals

Nissan Rogue Service Manual: Driver side door mirror defogger

Description

Heats the heating wire with the power supply from the rear window defogger relay to prevent the door mirror from fogging up.

Component Function Check

1. CHECK DOOR MIRROR DEFOGGER LH

Check that heating wire of door mirror defogger LH is heated when turning the rear window defogger switch ON.

Is the inspection result normal? YES >> Door mirror defogger is OK.

NO >> Refer to DEF-28, "Diagnosis Procedure".

Diagnosis Procedure

Regarding Wiring Diagram information, refer to DEF-12, "Wiring Diagram".

1. CHECK POWER SUPPLY CIRCUIT

  1.  Turn ignition switch OFF.
  2.  Disconnect door mirror LH.
  3.  Turn ignition switch ON.
  4.  Check voltage between door mirror LH connector and ground.

Check power supply circuit

Is the inspection result normal? YES >> GO TO 2.

NO >> Repair or replace harness.

2. CHECK GROUND CIRCUIT

  1.  Turn ignition switch OFF.
  2.  Check continuity between door mirror LH connector and ground.

Check ground circuit

Is the inspection result normal? YES >> GO TO 3.

NO >> Repair or replace harness.

3. CHECK DOOR MIRROR DEFOGGER LH

Check door mirror defogger LH.

Refer to DEF-29, "Component Inspection".

Is the inspection result normal? YES >> GO TO 4.

NO >> Replace door mirror. Refer to MIR-22, "Removal and Installation".

4. CHECK INTERMITTENT INCIDENT

Check intermittent incident.

Refer to GI-41, "Intermittent Incident".

Is the inspection result normal? YES >> Check the following.

NO >> Repair or replace the malfunctioning parts.

Component Inspection

1. CHECK DOOR MIRROR DEFOGGER LH

  1.  Turn ignition switch OFF.
  2.  Disconnect door mirror LH.
  3.  Check continuity between door mirror terminals.

Check door mirror defogger lh

Is the inspection result normal? YES >> Inspection End.

NO >> Replace door mirror LH. Refer to MIR-22, "Removal and Installation".

Rear window defogger power supply and ground circuit
Description Heats the heating wire with the power supply from the rear window defogger relay to prevent the rear window from fogging up. Component Function Check 1. CHECK REAR WINDOW DEFOGGER C ...

Passenger side door mirror defogger
Description Heats the heating wire with the power supply from the rear window defogger relay to prevent the door mirror from fogging up. Component Function Check 1.CHECK DOOR MIRROR DEFOGGER RH ...

Other materials:

System description
COMPONENT PARTS Component Parts Location No. Component Function 1 Combination meter Combination meter transmits the vehicle speed signal to BCM via CAN communication. BCM also receives the vehicle speed signal from ABS actuator and electric ...

Back door outer finisher
Exploded View Back door outer finisher License lamp finisher Clip Removal and Installation REMOVAL  Remove back door finisher. Refer to INT-38, "Removal and Installation".  Remove plugs (A) from back door (1). Remove back door outer finisher nuts. ...

Unit removal and installationEMBER
REAR SUSPENSION M Exploded View Rear suspension member  Suspension member stay (RH)  Suspension member stay (LH)  Bound bumper Front Removal and Installation - FWD REMOVAL  Remove wheel and tires using power tool. Refer to WT-60, "Exploded Vie ...

В© 2014-2019 Copyright www.nirogue.com