Nissan Rogue Service Manual: Information display (ASCD)

Nissan Rogue Service Manual / Engine / Engine Control System / DTC/Circuit diagnosis / Information display (ASCD)

Component Function Check

1.CHECK INFORMATION DISPLAY

Start engine.
Press ASCD MAIN switch on ASCD steering switch.
Drive the vehicle at more than 40 km/h (25 MPH).
CAUTION: Always drive vehicle at a safe speed.
Press SET/− switch.
Check that the reading of the speedometer shows the same value as the set speed indicated in the information display while driving the vehicle on a flat road.

Is the inspection result normal? YES >> INSPECTION END

NO >> Proceed to EC-475, "Diagnosis Procedure".

Diagnosis Procedure

1.CHECK DTC

Check that DTC UXXXX, P0500 or P1574 is not displayed.

Is the inspection result normal? YES >> GO TO 2.

NO-1 >> Perform trouble diagnosis for DTC UXXXX.

NO-2 >> Perform trouble diagnosis for DTC P0500. Refer to EC-350, "DTC Description".

NO-3 >> Perform trouble diagnosis for DTC P1574. Refer to EC-414, "DTC Description".

2.CHECK DTC WITH COMBINATION METER

Refer to MWI-21, "CONSULT Function (METER/M&A)".

Is the inspection result normal? YES >> GO TO 3.

NO >> Perform trouble diagnosis for DTC indicated.

3.CHECK INTERMITTENT INCIDENT

Perform GI-41, "Intermittent Incident".

Is the inspection result normal? YES >> Replace combination meter. Refer to MWI-82, "Removal and Installation".

NO >> Repair or replace error-detected parts.

Ignition signal

Component Function Check 1.INSPECTION START Turn ignition switch OFF, and restart engine. Does the engine start? YES-1 >> With CONSULT: GO TO 2. YES-2 >> Without CONSULT: GO TO 3. ...

Malfunction indicator lamp

Component Function Check 1.CHECK MIL FUNCTION Turn ignition switch ON. Check that MIL illuminates. Is the inspection result normal? YES >> INSPECTION END NO >> Proc ...

Other materials:

Wiring diagram
CAN SYSTEM Wiring Diagram - CAN SYSTEM - ...

TCM
Exploded View Bracket Bracket TCM : Vehicle front : N·m (kg-m, in-lb) Removal and Installation CAUTION: Do not impact the TCM when removing or installing TCM. When replacing TCM and transaxle assembly as a set, replace transaxle assembly first and then rep ...

Symptom diagnosis
CVT CONTROL SYSTEM Symptom Table The diagnosis item number indicates the order of check. Start checking in the order from 1. Perform diagnoses of symptom table 1 before symptom table 2. Symptom Table 1 Symptom Table 2 ...