Nissan Rogue Service Manual: Inspection and adjustment

ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT

ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Requirement

INITIALIZATION PROCEDURE

Moonroof

If the moonroof does not open or close automatically, use the following procedure to return moonroof operation to normal.

1.  Turn ignition switch ON.
2.  Push and hold the moonroof switch forward until the moonroof and sunshade stop and bounce back.
3.  Release the moonroof switch.
4.  Press and hold the moonroof switch within 6 seconds.
5.  The roof glass and shade will move to full open and back to full close.
6. Release the switch, initialization is complete if the moonroof operates normally.

ANTI-PINCH FUNCTION

Moonroof/Sunshade

1.  Fully open the moonroof to the full open position.
2.  Place a piece of wood at the fully closed position.
3.  Close the moonroof completely with auto-slide close function.
4.  Moonroof should make contact and then tilt up or travel in reverse.

CAUTION: • Do not test the anti-pinch function with your hands or other body parts because they may be pinched.

• Perform the initialization procedure when the auto-slide operation or anti-pinch function does not operate normally.