Nissan Rogue Service Manual: Meter control switch
Removal and Installation
REMOVAL
- Remove the instrument finisher (A). Refer to IP-14, "Exploded View".
- Remove the screws (A) and the meter control switch (1).
INSTALLATION
Installation is in the reverse order of removal.
Luggage room lamp
Removal and Installation
REMOVAL
Insert a suitable tool (A) into the gap between the luggage lower
finisher (RH) (2) and the top of luggage room lamp (1) to release
the pawl.
: Pawl
...
Service data and specifications (SDS)
Bulb Specifications
*:Always check with the parts department for the latest parts information. ...
Other materials:
P0706 transmission range sensor A
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
P0706
T/M RANGE SENSOR A
(Transmission Range Sensor A Circuit Range/
Performance)
When all of the following conditions are satisfied and this state ...
Preparation
Special Service Tool
The actual shape of the tools may differ from those illustrated here.
Tool number
(TechMate No.)
Tool name
Description
—
(J-46534)
Trim Tool Set
Removing trim components
Commercial Service Tools
(TechMate No ...
Auto operation does not operate
MOONROOF
MOONROOF : Diagnosis Procedure
1. PERFORM INITIALIZATION PROCEDURE
Perform initialization procedure.
Refer to RF-24, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair
Requirement".
Is the inspection result normal?
YES >> Moonroof system is normal.
...