Nissan Rogue manuals

Nissan Rogue Service Manual: Parking brake switch signal circuit

Nissan Rogue Service Manual / Driver information & multimedia / Warning Chime System / DTC/circuit diagnosis / Parking brake switch signal circuit

Component Function Check

1.CHECK PARKING BRAKE SWITCH OPERATION

Check that brake warning lamp in combination meter turns ON/OFF when parking brake is actuated.

Is the inspection result normal? YES >> Inspection End.

NO >> Proceed to diagnosis procedure. Refer to WCS-45, "Diagnosis Procedure".

Diagnosis Procedure

Regarding Wiring Diagram information, refer to WCS-29, "Wiring Diagram".

1.CONNECTOR INSPECTION

  1.  Turn ignition switch OFF.
  2.  Disconnect combination meter and parking brake switch connectors.
  3.  Check connectors and terminals for deformation, disconnection, looseness or damage.

Is the inspection result normal? YES >> GO TO 2.

NO >> Repair or replace as necessary.

2.CHECK PARKING BRAKE SWITCH

Check parking brake switch. Refer to WCS-46, "Component Inspection".

Is the inspection result normal? YES >> GO TO 3.

NO >> Replace parking brake switch. Refer to PB-7, "Exploded View".

3.CHECK PARKING BRAKE SWITCH SIGNAL

With CONSULT.

  1.  Connect combination meter connector and parking brake switch connectors.
  2.  Turn ignition switch ON.
  3.  In DATA MONITOR select "PKB SW" and check parking brake switch signal.

Check parking brake switch signal

Is the inspection result normal? YES >> Refer to WCS-37, "Work Flow".

NO >> GO TO 4.

4.CHECK PARKING BRAKE SWITCH CIRCUIT

  1.  Turn ignition switch OFF.
  2.  Disconnect combination meter and parking brake switch connectors.
  3.  Check continuity between combination meter connector M76 terminal 26 and parking brake switch connector E52 terminal 1.

Check parking brake switch circuit

  1. Check continuity between combination meter connector and ground.

Check parking brake switch circuit

Is the inspection result normal? YES >> Replace combination meter. Refer to MWI-82, "Removal and Installation".

NO >> Repair or replace malfunctioning components.

Component Inspection

1.CHECK PARKING BRAKE SWITCH

  1.  Turn ignition switch OFF.
  2.  Disconnect parking brake switch connector.
  3.  Check continuity between parking brake switch terminal 1 and ground.

Check parking brake switch

Is the inspection result normal? YES >> Inspection End.

NO >> Replace parking brake switch. Refer to PB-7, "Exploded View".

Seat belt buckle switch signal circuit
Description Transmits a seat belt buckle switch signal to the combination meter. Component Function Check 1. CHECK COMBINATION METER INPUT SIGNAL  Ignition ON.  Monitor seat belt wa ...

Key switch signal circuit (without intelligent key)
Description Transmits a key switch signal to the BCM. Component Function Check 1. CHECK BCM INPUT SIGNAL Select "Data Monitor" for "BCM" and check the "KEY ON SW" mon ...

Other materials:

Preparation
Special Service Tool The actual shape of the tools may differ from those tools illustrated here. Tool number (TechMate No.) Tool name Description — (J-50190) Signal Tech II Activate and display TPMS transmitter IDs  Display tire ...

Rear-facing child restraint installation using the seat belts
Rear-facing child restraint installation using the seat belts WARNINGThe three-point seat belt with Automatic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use the ALR mode will result in the child restraint not being properly secured. The ...

Preparation
Special Service Tools The actual shape of the tools may differ from those illustrated here. Tool number (TechMate No.) Tool name Description — (165-GR8-1200KIT-NI) Multitasking battery and electrical diagnostic station Testing batteries, starting and ...

© 2014-2019 Copyright www.nirogue.com