Nissan Rogue Service Manual: Preparation

Nissan Rogue Service Manual / Engine / Exhaust System / Preparation

Special Service Tool

The actual shape of the tools may differ from those illustrated here.

Tool number (TechMate No.) Tool name		Description
— (J-43897-18) Oxygen sensor thread cutter		Reconditioning the exhaust system threads before installing a new oxygen sensor (Use with anti-seize lubricant) M18 x 1.5 threads

Commercial Service Tools

Tool name		Description
Power tool		Loosening nuts, screws and bolts
Heated oxygen sensor wrench		Loosening or tightening heated oxygen sensor For 22 mm (0.87 in) hexagon nut
Anti-seize lubricant (Permatex 133AR or equivalent meeting MIL specification MIL-A-907)		Lubricating oxygen sensor thread cleaning tool when reconditioning exhaust system threads

Precaution

Precaution for supplemental restraint system (srs) "air bag" and "seat belt pre-tensioner" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIO ...

Periodic maintenance

EXHAUST SYSTEM Inspection Check exhaust pipes, muffler, and mounting for improper attachment, leakage, cracks, damage or deterioration. If anything is found, repair or replace damaged par ...

Other materials:

iPod®* player operation with Navigation System (if so equipped)
iPod®* player operation with Navigation System Connecting iPod® WARNINGDo not connect, disconnect, or operate the USB device while driving. Doing so can be a distraction. If distracted you could lose control of your vehicle and cause an accident or serious injury. & ...

CAN system (type 1)
DTC/CIRCUIT DIAGNOSIS MAIN LINE BETWEEN IPDM-E AND DLC CIRCUIT Diagnosis Procedure 1.CHECK CONNECTOR Turn the ignition switch OFF. Disconnect the battery cable from the negative terminal. Check the following terminals and connectors for damage, bend and loose connecti ...

C1109 power and ground system
DTC Logic DTC DETECTION LOGIC DTC Display Item Malfunction detected condition Possible causes C1109 BATTERY VOLTAGE [ABNORMAL] When ignition voltage is 10 V or less. When ignition voltage is 16 V or more. Harness or connector ...