Nissan Rogue Service Manual: Removal and installation

The ambient temperature display is incorrect

Description The displayed outside air temperature is higher than the actual temperature.  The displayed outside air temperature is lower than the actual temperature.  Outside a ...

Combination meter

Removal and Installation REMOVAL  Disconnect the negative battery terminal. Refer to PG-77, "Removal and Installation".  Remove the cluster lid A. Refer to IP-20, "R ...

Other materials:

P0443 EVAP canister purge volume control solenoid valve
DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition P0443 PURG VOLUME CONT/V (Evaporative emission system purge control valve circuit) A The canister purge flow is detected during the vehicle i ...

U1000 CAN COMM circuit
Description CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle multiplex communication line with high data communication speed and excellent error detection ability. Many electronic control units are equipped onto a vehicle, and each co ...

Key switch signal circuit (without intelligent key)
Description Transmits a key switch signal to the BCM. Component Function Check 1. CHECK BCM INPUT SIGNAL Select "Data Monitor" for "BCM" and check the "KEY ON SW" monitor value. Is the inspection result normal? YES >> Inspection End. NO >> Refer ...