Nissan Rogue manuals

Nissan Rogue Service Manual: Symptom diagnosis

INTERIOR LIGHTING SYSTEM SYMPTOMS

Symptom Table

CAUTION: Perform the self-diagnosis with CONSULT before the symptom diagnosis. Perform the trouble diagnosis if any DTC is detected.

Symptom

Possible cause

Inspection item

All the following lamps do not turn ON.
  •  Map lamp
  •  Room lamp
  •  Luggage room lamp
  • Harness between BCM and each interior room lamp
  •  BCM
Interior room lamp power supply circuit Refer to INL-46.
  • Interior room lamp does not turn ON even though the door is open.

    (It turns ON when turning the interior room lamp ON.)

  •  Interior room lamp does not turn OFF even though the door is closed.
  • Harness between BCM and each door switch
  •  Harness between BCM and each interior room lamp
  •  BCM
Door switch circuit Refer to DLK-149, "Component Function Check" (with Intelligent Key system) or DLK-319, "Component Function Check" (without Intelligent Key system).

Interior room lamp control circuit Refer to INL-49.

Interior room lamp timer does not activate.

(It turns ON/ OFF when the door opens/closes.)

—

Check the interior room lamp setting.

Refer to INL-9, "INTERIOR ROOM LAMP BATTERY SAVER SYSTEM : System Description".

  • Luggage room lamp does not turn ON even though the back door is open.
  •  Luggage room lamp does not turn OFF even though the back door is closed.
  • Harness between BCM and back door switch
  •  Harness between BCM and luggage room lamp
  •  BCM
Back door switch circuit Refer to DLK-151, "Component Function Check" (with Intelligent Key system) or DLK-319, "Component Function Check" (without Intelligent Key system).
Luggage room lamp circuit Refer to INL-51.
Power switch illumination does not illuminate.
  • Harness between BCM and power switch
  •  BCM
Power switch illumination circuit Refer to INL-52.
Interior room lamp battery saver does not activate. BCM Replace BCM.

Refer to BCS-75, "Removal and Installation" (with Intelligent Key system) or BCS-135, "Removal and Installation" (without Intelligent Key system).

Power switch illumination circuit
Description Provides the power supply and the ground to control the power switch illumination. Component Function Check 1.CHECK POWER SWITCH ILLUMINATION OPERATION CONSULT ACTIVE TEST   ...

Removal and installation
...

Other materials:

Water hose
Exploded View Water outlet Hose clamp Water hose A Clip CVT oil warmer Transaxle assembly Water hose B Heater thermostat Water hose C : Always replace after every disassembly. : N·m (kg-m, ft-lb) Removal and Installation REMOVAL WARNING: Do not remove the rad ...

Child safety
WARNINGDo not allow children to play with the seat belts. Most seating positions are equipped with Automatic Locking Retractor (ALR) mode seat belts. If the seat belt becomes wrapped around a child’s neck with the ALR mode activated, the child can be seriously injured or k ...

Monitor, climate, audio, phone and voice recognition systems
WARNING  Positioning of the heating or air conditioning controls and display controls should not be done while driving in order that full attention may be given to the driving operation.  Do not disassemble or modify this system. If you do, it may result ...

© 2014-2019 Copyright www.nirogue.com