![]() |
Anti-lock Braking System (ABS) warning light |
![]() |
Brake warning light |
![]() |
Charge warning light |
![]() |
Low tire pressure warning light |
![]() |
Low windshield washer fluid warning light (if so equipped) |
![]() |
Master warning light |
![]() |
Power steering warning light |
![]() |
Seat belt warning light and chime |
![]() |
Supplemental air bag warning light |
![]() |
All-Wheel Drive (AWD) AUTO indicator light (if so equipped) |
![]() |
All-Wheel Drive (AWD) LOCK indicator light (if so equipped) |
![]() |
ECO Mode indicator light |
![]() |
Front fog light indicator light (if so equipped) |
![]() |
Front passenger air bag status light |
![]() |
High beam indicator light (blue) |
![]() |
Hill descent indicator light (if so equipped) |
![]() |
Malfunction Indicator Light (MIL) |
![]() |
Overdrive off indicator light |
![]() |
Security indicator light |
![]() |
Slip indicator light |
![]() |
Sport mode indicator light |
![]() |
Turn signal/hazard indicator lights |
![]() |
Vehicle Dynamic Control (VDC) off indicator light |
Checking bulbs
With all doors closed, apply the parking brake and place the ignition switch to the ON position without starting the engine. The following lights will come on:
, or
,
,
,
The following lights come on briefly and then go off:
,
,
,
,
,
If any light fails to come on, it may indicate a burned-out bulb or an open circuit in the electrical system. Have the system repaired promptly.
Oil seal
VALVE OIL SEAL
VALVE OIL SEAL : Removal and Installation
REMOVAL
Remove camshafts. Refer to EM-64, "Removal and Installation".
Remove valve lifters. Refer to EM-56, "Disassembly and Assembly".
Rotate crankshaft, and set piston whose valve oil seal is t ...
Inside mirror
Exploded View
MANUAL ANTI-DAZZLING
Windshield glass
Mirror base
Inside mirror
AUTO ANTI-DAZZLING
Windshield glass
Mirror base
Inside mirror
Inside mirror finisher
Harness connector
Bolt
Removal and Installation
MANUAL ANTI-DAZZLING
Removal ...
Intermittent incident
DESCRIPTION
Sometimes the symptom is not present when the vehicle is brought in for
service. If possible, re-create the
conditions present at the time of the incident. Doing so may help avoid a No
Trouble Found Diagnosis. The following section illustrates ways to simulate the
conditions/envi ...