Nissan Rogue manuals

Nissan Rogue Owners Manual: Engine coolant temperature gauge

Engine coolant temperature gauge
Engine coolant temperature gauge

The gauge indicates the engine coolant temperature.

The engine coolant temperature is within the normal range 1 when the gauge needle points within the zone shown in the illustration.

The engine coolant temperature varies with the outside air temperature and driving conditions.

CAUTION

If the gauge indicates coolant temperature near the hot (H) end of the normal range, reduce vehicle speed to decrease temperature. If the gauge is over the normal range, stop the vehicle as soon as safely possible. If the engine is overheated, continued operation of the vehicle may seriously damage the engine. For additional information, refer to “If your vehicle overheats” in the “In case of emergency” section of this manual for immediate action required.

Speedometer and odometer
Speedometer The speedometer indicates vehicle speed. Odometer/Twin trip odometer The odometer 1 and the twin trip odometer 2 are displayed below the Vehicle Information Display when the ignitio ...

Fuel gauge
Fuel gauge The gauge indicates the approximate fuel level in the tank. The gauge may move slightly during braking, turning, acceleration, or going up or down hills. The gauge needle returns ...

Other materials:

Periodic maintenance
HEADLAMP AIMING ADJUSTMENT Inspection PREPARATION BEFORE ADJUSTING Before performing aiming adjustment, check the following:  Make sure all tires are inflated to correct pressure.  Place vehicle and screen on level surface.  Make sure there is no load in vehicle other than ...

P2122, P2123 APP sensor
DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition P2122 APP SEN 1/CIRC (Throttle/pedal position sensor/switch ″D″ circuit low) An excessively low voltage from the APP sensor 1 is sen ...

C1730, C1731, C1732, C1733 flat tire
DTC Logic NOTE: The Signal Tech II Tool [- (J-50190)] can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information.  Activate and display TPMS sensor IDs  Display tire pressure reported by the TPMS sensor  Read TPMS DTC ...

© 2014-2019 Copyright www.nirogue.com