Nissan Rogue Service Manual: Low tire pressure warning lamp stays on

Nissan Rogue Service Manual / Suspension / Road Wheels & Tires / Symptom diagnosis / Low tire pressure warning lamp stays on

Low Tire Pressure Warning Lamp Stays On When Ignition Switch Is Turned On

1.CHECK BCM CONNECTORS

Turn ignition switch OFF.
Disconnect BCM connectors.
Check terminals for damage or loose connections.

Is the inspection result normal? YES >> GO TO 2.

NO >> Repair or replace damaged connectors.

2.BCM POWER SUPPLY AND GROUND CIRCUITS

Check BCM power supply and ground circuits. Refer to BCS-68, "Diagnosis Procedure".

Is the inspection result normal? YES >> Replace BCM. Refer to BCS-75, "Removal and Installation" (with Intelligent Key System) or BCS- 135, "Removal and Installation" (without Intelligent Key System).

NO >> Repair BCM circuits.

Low tire pressure warning lamp does not turn on

Low Tire Pressure Warning Lamp Does Not Come On When Ignition Switch Is Turned On NOTE: The Signal Tech II Tool [- (J-50190)] can be used to perform the following functions. Refer to the Signal ...

Low tire pressure warning lamp blinks

Description The low tire pressure warning lamp blinks when the power switch is turned ON. NOTE: The position of an inactive tire pressure sensor can be identified by checking the blinking timing ...

Other materials:

Luggage trim
Exploded View WITH THIRD ROW SEAT Tonneau cover (if equipped) Strap (LH/RH) Luggage floor finisher (RH) Luggage floor center finisher Luggage floor finisher (LH) Luggage side lower finisher (LH) Luggage side upper finisher (LH) Hooks (LH/RH) Lug ...

DTC/circuit diagnosis
U1000 CAN COMM CIRCUIT Description CAN (Controller Area Network) is a serial communication system for real time application. It is an on-vehicle multiplex communication system with high data communication speed and excellent error detection ability. Many electronic control units are equipp ...

Mudguard
Exploded View Front mud guard Rear mud guard Removal and Installation FRONT MUD GUARD Removal Remove front mud guard screws and remove front mud guard. Installation Installation is in the reverse order of removal. REAR MUD GUARD Removal Remove rear mud guard screws and re ...