Nissan Rogue manuals

Nissan Rogue Service Manual: Preparation

Nissan Rogue Service Manual / Ventilation, heater & air conditioner / Heater & Air Conditioning System / Preparation

Special Service Tool

The actual shape of the tools may differ from those illustrated here.

Tool number (TechMate No.) Tool name

Description
— (J-41425-NIS) Aluminum tube repair kit

Repairing leaks in A/C tube
— (J-38873-A) Drive plate installer

Installing pulley

Commercial Service Tool

(TechMate No.) Tool name

Description
(J-41810-NI) Refrigerant identifier equipment (R- 134a)

For checking refrigerant purity and system contamination
( — ) Power Tool

Loosening nuts, screws and bolts
— (J-48710) NISSAN ACR2009 RRR Unit

Refrigerant recovery, recycling and recharging
— (J-41995) Electronic refrigerant leak detector

Power supply:
  •  DC 12V (battery terminal)
— (J-43926) Refrigerant dye leak detection kit Kit includes:
(J-42220) UV lamp and UV safety goggles
(J-41459) Refrigerant dye injector
(J-41447) Fluorescent leak detection dye (box of 24, 1/4 ounce bottles)
(J-43872) Refrigerant dye cleaner

Power supply:
  •  DC 12V (battery terminal)
— (J-39183-C) Manifold Gauge Set (with hoses and couplers)

Identification:
  •  The gauge face indicates R-134a.

    Fitting size-Thread size

  •  1/2”-16 ACME
Service Hoses:
  •  High side hose (J-39500-72B)
  •  Low side hose (J-39500-72R)
  •  Utility hose (J-39500-72Y)

Hose color:
  •  Low side hose: Blue with black stripe
  •  High side hose: Red with black stripe
  •  Utility hose: Yellow with black stripe or green with black stripe Hose fitting to gauge:
  •  1/2”-16 ACME
Service couplers
  •  High side coupler (J-39500-20A)
  •  Low side coupler (J-39500-24A)

Hose fitting to service hose:
  •  M14 x 1.5 fitting is optional or permanently attached.
— (J-39699) Refrigerant Weight Scale

For measuring of refrigerant Fitting size-Thread size
  •  1/2”-16 ACME
— (J-39649) Vacuum Pump (Including the isolator valve)

Capacity:
  •  Air displacement: 4 CFM
  •  Micron rating: 20 microns
  •  Oil capacity: 482 g (17 oz) Fitting size-Thread size
  •  1/2”-16 ACME
— (J-46534) Trim Tool Set

Removing trim components

Sealant and/or Oil

Tool number (TechMate No.) Tool name

Description
— ( — ) HFC-134a (R-134a) Refrigerant

Container color: Light blue Container marking: HFC-134a (R- 134a) Fitting size: Thread size
  •  large container 1/2”-16 ACME
— ( — ) ND-OIL 8

Type: Nippon Denso Oil 8 (ND-OIL 8) Application: HFC-134a (R-134a)
Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONE ...

System description
...

Other materials:

Removal and installation
A/C SWITCH ASSEMBLY Removal and Installation REMOVAL  Release the A/C switch assembly clips and pawls using a suitable tool. : Metal clip : Pawl  Disconnect the harness connector from the A/C switch assembly (1) and remove. INSTALLATION Installation is in the reve ...

Engine control system
Symptom Table SYSTEM — BASIC ENGINE CONTROL SYSTEM 1 - 6: The numbers refer to the order of inspection. (continued on next table) SYSTEM — ENGINE MECHANICAL & OTHER 1 - 6: The numbers refer to the order of inspection. ...

CVT oil warmer
Exploded View Transaxle assembly CVT oil warmer : N·m (kg-m, in-lb) Removal and Installation REMOVAL WARNING: Do not remove the radiator cap when the engine is hot. Serious burns could occur from high pressure engine coolant escaping from the radiator. Wrap a thick cloth around ...

© 2014-2019 Copyright www.nirogue.com