Nissan Rogue Service Manual: Symptom diagnosis

PUSH-BUTTON IGNITION SWITCH DOES NOT OPERATE

Description

Check that vehicle Operating Conditions are as listed in “Conditions of Vehicle” below before starting Diagnosis Procedure. Make sure to check each symptom in Diagnosis Procedure.

NOTE: The engine start function, door lock function, power distribution system, and NATS-NVIS in the Intelligent Key system are closely related to each other regarding control. The vehicle security function can operate only when the door lock and power distribution system are operating normally.

Conditions of Vehicle (Operating Conditions) One or more of Intelligent Keys with registered Intelligent Key ID is in the vehicle.

Diagnosis Procedure

1.PERFORM WORK SUPPORT

Perform “INSIDE ANT DIAGNOSIS” in “Work Support” of “INTELLIGENT KEY” with CONSULT. Refer to PCS- 44, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)".

>> GO TO 2.

2.PERFORM SELF DIAGNOSTIC RESULT

Perform “Self Diagnostic Result” of “BCM” with CONSULT.

Are any DTCs detected? YES >> Refer to BCS-48, "DTC Index".

NO >> GO TO 3.

3.CHECK PUSH-BUTTON IGNITION SWITCH

Check push-button ignition switch. Refer to PCS-73, "Component Inspection".

Is the inspection result normal? YES >> Refer to GI-41, "Intermittent Incident".

NO >> Repair or replace malfunctioning parts.