Nissan Rogue manuals

Nissan Rogue Service Manual: Vehicle recovery (freeing a stuck vehicle)

Nissan Rogue Service Manual / General information / Precaution / Tow truck towing / Vehicle recovery (freeing a stuck vehicle)

FRONT

Securely install the vehicle recovery hook stored with jacking tools.

Check that the hook is properly secured in the stored place after use.

WARNING:

CAUTION:

Vehicle recovery (freeing a stuck vehicle)

REAR

WARNING:

CVT To tow a vehicle equipped with an automatic transmission, an appropriate vehicle dolly MUST be placed under the towed vehicle's drive wheels. Always follow the dolly manufacture's recommendations when using their product.

If the vehicle is stuck in sand, snow, mud, etc., use the following procedure:

  1.  Turn off the Vehicle Dynamic Control System.
  2.  Check the area in front and behind the vehicle is clear of obstructions.
  3. Turn the steering wheel right and left to clear an area around the front tires.
  4.  Slowly rock the vehicle forward and backward.

    Shift back and forth between R (reverse) and D (drive).

    Apply the accelerator as little as possible to maintain the rocking motion.

    Release the accelerator pedal before shifting between R and D.

    Do not spin the tires above 35 mph (55 km/h).

  5.  If the vehicle can not be freed after a few tries, contact a professional towing service to remove the vehicle.
Tow truck towing
CAUTION:  All applicable state or Provincial (in Canada) laws and local laws regarding the towing operation must be obeyed.  It is necessary to use proper towing equipment to avoi ...

Vehicle information
Identification information Model Variation FWD Model AWD Model Prefix and Suffix Designations Identification Number Air conditioner specification label  Emission co ...

Other materials:

System description
COMPONENT PARTS Component Parts Location Right rear wheel area Instrument panel Engine compartment  Left side of instrument panel (view with trim panel removed) No. Part Function 1 Optical sensor Refer to EXL-140, "Optical Senso ...

Door switch
WITH INTELLIGENT KEY WITH INTELLIGENT KEY : Component Function Check 1.CHECK FUNCTION  Select "DOOR LOCK" of "BCM" using CONSULT.  Select "DOOR SW-DR", "DOOR SW-AS", "DOOR SW-RL", "DOOR SW-RR", in "Data Monitor&quo ...

C1601 battery power supply
DTC Logic DTC DETECTION LOGIC DTC Display item Malfunction detected condition Possible cause C1601 BATTERY VOLT When a power supply voltage to the EPS control unit is maintained at 18.2 V or more or at less than 9 V continuously for five second ...

В© 2014-2019 Copyright www.nirogue.com