Nissan Rogue manuals

Nissan Rogue Owners Manual: Air conditioner operation

Start the engine, turn the fan control dial to the desired position, and press the button to activate the air conditioner. When the air conditioner is on, cooling and dehumidifying functions are added to the heater operation.

The air conditioner cooling function operates only when the engine is running.

Cooling

This mode is used to cool and dehumidify the air.

  1.  Press the air flow control button.
  2.  Turn the fan control dial to the desired position.
  3.  Push the button. The indicator light on the button will come on.
  4.  Turn the temperature control dial to the desired position.

Dehumidified heating

This mode is used to heat and dehumidify the air.

  1.  Press the button to the OFF position.
  2.  Press the air flow control button.
  3.  Turn the fan control dial to the desired position.
  4.  Push the button.
  5.  Turn the temperature control dial to the desired position.

Dehumidified defogging

This mode is used to defog the windows and dehumidify the air.

  1.  Press the air flow control button.
  2.  Turn the fan control dial to the desired position.
  1.  Turn the temperature control dial to the desired position.

Operating tips

Heater operation
Heating This mode is used to direct heated air to the foot outlets. Some air also flows from the defrost outlets and the side vent outlets.  Press the button to change to fresh air i ...

Air flow charts
The following charts show the button and dial positions for MAXIMUM AND QUICK heating, cooling or defrosting. The air recirculation indicator should always be in the OFF position for heating and d ...

Other materials:

Calibration of decel G sensor
Description CAUTION: Always perform the decel G sensor calibration before driving when the following operation is performed. NOTE: Yaw rate/side/decel G sensor calibration is performed when performing the decel G sensor calibration. Work Procedure Decel G sensor calibration CAUTION: ...

Shift lock system
Component Function Check 1.CHECK SHIFT LOCK OPERATION (PART 1)  Turn ignition ON.  Shift the selector lever to “P” position.  Attempt to shift the selector lever to any other than position with the brake pedal released. Can the selector lever be shifted to any other ...

Tow truck towing
CAUTION:  All applicable state or Provincial (in Canada) laws and local laws regarding the towing operation must be obeyed.  It is necessary to use proper towing equipment to avoid possible damage to the vehicle during towing operation. Towing is in accordance with Towing P ...

© 2014-2019 Copyright www.nirogue.com