Nissan Rogue Owners Manual: Precautions on child restraints

Nissan Rogue Owners Manual / Safety—Seats, seat belts and supplemental restraint system / Child restraints / Precautions on child restraints

Precautions on child restraints

WARNING

Failure to follow the warnings and instructions for proper use and installation of child restraints could result in serious injury or death of a child or other passengers in a sudden stop or collision:

The child restraint must be used and installed properly. Always follow all of the child restraint manufacturer’s instructions for installation and use
Infants and children should never be held on anyone’s lap. Even the strongest adult cannot resist the forces of a collision.
Do not put a seat belt around both a child and another passenger.
NISSAN recommends that all child restraints be installed in the rear seat. Studies show that children are safer when properly restrained in the rear seat than in the front seat. If you must install a forward-facing child restraint in the front seat, refer to “Forward-facing child restraint installation using the seat belts” in this section.
Even with the NISSAN Advanced Air Bag System, never install a rearfacing child restraint in the front seat.
An inflating air bag could seriously injure or kill a child. A rear-facing child restraint must only be used in the rear seat.
Be sure to purchase a child restraint that will fit the child and vehicle.
Some child restraints may not fit properly in your vehicle.
Child restraint anchorages are designed to withstand only those loads imposed by correctly fitted child restraints.
Under no circumstances are they to be used to attach adult seat belts, or other items or equipment to the vehicle. Doing so could damage the child restraint anchorages. The child restraint will not be properly installed using the damaged anchorage, and a child could be seriously injured or killed in a collision.
Never use the anchor points for adult seat belts or harnesses.
A child restraint with a top tether strap should not be used in the front passenger seat.
Keep seatbacks as upright as possible after fitting the child restraint.
Infants and children should always be placed in an appropriate child restraint while in the vehicle.

When the child restraint is not in use, keep it secured with the LATCH system or a seat belt. In a sudden stop or collision, loose objects can injure occupants or damage the vehicle.

CAUTION

A child restraint in a closed vehicle can become very hot. Check the seating surface and buckles before placing a child in the child restraint.

This vehicle is equipped with a universal child restraint anchor system, referred to as the LATCH (Lower Anchors and Tethers for CHildren) system.

Some child restraints include rigid or webbing-mounted attachments that can be connected to these anchors. For additional information, refer to “LATCH (Lower Anchors and Tethers for CHildren) system” in this section.

If you do not have a LATCH compatible child restraint, the vehicle seat belts can be used.

Several manufacturers offer child restraints for infants and children of various sizes. When selecting any child restraint, keep the following points in mind:

Choose only a restraint with a label certifying that it complies with Federal Motor Vehicle Safety Standard 213 or Canadian Motor Vehicle Safety Standard 213.
Check the child restraint in your vehicle to be sure it is compatible with the vehicle’s seat and seat belt system.
If the child restraint is compatible with your vehicle, place your child in the child restraint and check the various adjustments to be sure the child restraint is compatible with your child. Choose a child restraint that is designed for your child’s height and weight.
Always follow all recommended procedures.
If the combined weight of the child and child restraint is less than 65 lbs (29.5 kg), you may use either the LATCH anchors or the seat belt to install the child restraint (not both at the same time).
If the combined weight of the child and child restraint is greater than 65 lbs (29.5 kg), use the vehicle’s seat belt (not the lower anchors) to install the child restraint.
Be sure to follow the child restraint manufacturer’s instructions for installation.

All U.S. states and Canadian provinces or territories require that infants and small children be restrained in an approved child restraint at all times while the vehicle is being operated. Canadian law requires the top tether strap on forward-facing child restraints be secured to the designated anchor point on the vehicle.

Child restraints

...

LATCH (Lower Anchors and Tethers for CHildren) System

LATCH system lower anchor locations - bench seat Your vehicle is equipped with special anchor points that are used with LATCH system compatible child restraints. This system may also be referr ...

Other materials:

Exterior and interior lights
Item Wattage (W) Bulb No. Headlight assembly* High 65 H9 Low 55 H11 Park 5 W5W Turn 28/8 7444 Sidemarker 5 WY5W Front fog lights (if so equipped) 55 H11 ...

Lights
Headlights Replacing the halogen headlight bulb (if so equipped) The headlight is a semi-sealed beam type which uses a replaceable headlight (halogen) bulb. Because the headlight assembly must be removed from the vehicle for bulb replacement, see your NISSAN dealer. CAUTION ...

DTC/circuit diagnosis
U1000 CAN COMM CIRCUIT WITH INTELLIGENT KEY WITH INTELLIGENT KEY : Description Refer to LAN-8, "System Description". WITH INTELLIGENT KEY : DTC Logic DTC DETECTION LOGIC NOTE: U1000 can be set if a module harness was disconnected and reconnected, perhaps during a repair. Confirm ...